S0 9280 Dunlop Air Spring M10 15670 Double Bellow Air Bag Gas Filled

Product Description

S0 9280 Dunlop Air Spring Meric M10 Blind Nuts Granning 15670 For Forklifts

AIRSUSTECH 2B7679 Cross OEM Original Equipment Manufacturer:

AIRSUSTECH 2B7679

AIRSUSTECH rubber bellows 2B20F-2

Firestone: 7679

Firestone:W01-358-7679

Firestone:W01 358 7679

Firestone:W013587679

ContiTech:FD 200-25 453 1/4 NPT

ContiTech:FD 200 25 453 1/4 NPT

ContiTech:FD200 25 453 1/4 NPT

Goodyear:2B9-269

Goodyear:2B9 269

Goodyear:2B9269

Goodyear Bellows NO.:578-92-3-206

Goodyear Bellows NO.:578 92 3 206

Goodyear Bellows NO.:578923206

Goodyear Bellows NO.:578-92-3-202

Goodyear Bellows NO.:578 92 3 202

Goodyear Bellows NO.:578923202
 

AIRSUSTECH 2B6927 Specifications and Detail Technical Parameters

 
❶Nut/blind nut
Top plate screw (nut) teeth: 2xM10X1.5
The screw center distance of the top cover plate: 89 mm
Screw (nut) teeth of the bottom cover plate: 2xM10X1.5
The screw center distance of the bottom cover plate: 89 mm
❷Air hole/air inlet/air fittings
Air hole/air inlet: 1/4 NPT
Screw center distance between air hole and nut: 44 mm
❸Cover plate
Top plate diameter: 160 mm
Diameter of the bottom cover: 160 mm
Bell rubber bellows
Maximum diameter of rubber bellows: 262 mm
Natural diameter of rubber bellows:240 mm
Working stroke: minimum 95 mm to maximum 325 mm
Maximum height: 325 mm
Minimum height: 95 mm
Stroke height: 230 mm
❺Bumper block/bumper block
No bumper block
❻Belt loop/Belt loop
There is a belt hoop: a belt hoop
 

AIRSUSTECH 2B7679 Repalces S0 9280 Dunlop Air Spring product description:

The air spring shock absorber AIRSUSTECH 2B7679 Repalces S0 9280 Dunlop Air Spring can only push the bellows towards the workpiece, otherwise it must be equipped with a stroke limiter at the end of the stroke, otherwise the bellows will be overloaded

• In order to press the air spring shock absorber AIRSUSTECH 2B7679 Repalces S0 9280 Dunlop Air Spring to the minimum height, a restoring force is required. Usually, this is achieved by applying a load

• The entire bearing surface of the upper and lower plates of the air spring shock absorber AIRSUSTECH 2B7679 Repalces S0 9280 Dunlop Air Spring must be used to absorb the force

• Before disassembling the air spring shock absorber AIRSUSTECH 2B7679 Repalces S0 9280 Dunlop Air Spring , the internal air must be released to prevent accidents and personal injury.

• During operation, the rubber air spring shock absorber AIRSUSTECH 2B7679 Repalces S0 9280 Dunlop Air Spring shall not be in contact with other parts

Airsustech Cross to DUNLOP UK PART NO. and FIRESTONE PAGE PART NO.