 |
Super Cushion Goodyear Air Spring 578-91-3-301 1B12-313 1B12 313 Single Bellow
Product Details:
| Place of Origin: | Guangzhou China |
| Brand Name: | AIRSUSTECH |
| Certification: | ISO/TS16949:2009 |
| Model Number: | 1B12-313 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 3Pieces |
|---|---|
| Packaging Details: | Strong Carton Box or as Customers Requirement |
| Delivery Time: | 5-8 Working Days |
| Payment Terms: | T/T, Western Union, Paypal or Others |
| Supply Ability: | 1000PCS/Week |
|
Detail Information |
|||
| Material: | Rubber And Steel | Certifications: | ISO/TS16949:2009 |
|---|---|---|---|
| Warranty: | One Year | Convoluted: | Single |
| Packing: | Neutral Box Or As Customers' Request | Sample: | Available |
| Type: | Industrial Air Springs | Goodyear: | Goodyear 1B12-313 |
| Condition: | 100% New | Original: | Mexico |
| High Light: | Goodyear Air Spring 578-91-3-301,1B12-313 Goodyear Air Spring,Single Bellow Goodyear Air Spring |
||
Product Description
Goodyear Super Cushion Air Spring 578-91-3-301 1B12-313 1B12 313 Single Bellow
Item Details
This air spring is imported from Mexico.
Goodyear Part number: 1B12-313; 1B12 313; 1B12313
Goodyear Bellow number: 579-913-201; 579 913 201; 579913201; 579-91-3-201; 579 91 3 201
Other Cross Reference
AUTOMANN: ABSP1B22A-7008; ABSP1B22A 7008; ABSP1B22A7008
CONTI/ Contitech/ Continental: 64596; FS 330-11 474; FS 330 11 474; FS 330-11474; FS33011474
FIRESTONE: W013587008; W01 358 7008; W01-358-7008; WO13587008; WO1 358 7008; WO1-358-7008
1B12-313 Air Spring Specifications and Parameters
Air Fitting
1/4''-18 NPTF Offset 2.87''
Screw center Distance
6.2''
MAX. O.D. At 100PSIG
13.2''
Top Plate Width
9.00"
Base Width
9.00"
Max. Extended Height
7.2''
Compressed Height
2.3''
| Assembly Number | Elastomer | Air Fittings | Bumper Included |
| 1B12-313 | NAT, Rubber | 1/4-18'' NPTF Offset 2.87'' | NO |
| 1B12-301 | NAT, Rubber | 1/4-18'' NPTF Offset 2.87'' | YES |
| 1B12-304 | NAT, Rubber | 3/4-18'' NPTF Offset 2.87'' | NO |
| 1B12-305 | NAT, Rubber | 3/4-18'' NPTF Offset 2.87'' | YES |
| 578913301 Flexmember only | NAT, Rubber | / | / |
Bellows Type Air Spring
Bellows air springs have one, two or three convolutions in the flexible member. There are two styles of bellows; crimped design . With the crimped design, the end retainers are permanently attached by mechanically crimping the retainer around the built-in bead wire of the flexible member.
Don't of air spring
1. Do not exceed 200 psi internal pressure in compression, or in other condition.
2. Do not permit the air spring to be compressed below its compressed height with no bumper in any application.
3. Do not put air spring in torsion. To do so may cause the air spring assembly to fail
4. Do not exceed the maximum extended height shown for isolators under any conditions. To do so may cause structural damage to the assembly. Travel should be limited to the actuator height limit for optimum life.
5. Do not exceed the 100 psi maximum inflation pressure.
Application
In a vibration isolation application where the mounted mass is the source of the forced vibration, the amplitude of the vibration is dependent upon the forced freqency and the ratio of unbalanced mass in motion to the total mounted mass. The greater this ratio is, the greater will be the amplitude of vibration.
Where amplitudes are larger than desired, they can be reduced by adding damping through the use of shock absorbers. Another approach to reducing the amplitude is to add weight (an inertial base) to the mounted mass, thus reducing the ratio of the unbalanced mass to the mounted mass.
The related picture of 1B12-313 goodyear helper bag/air springs
