Suspension Air Spring 3B10X3T AIRSUSTECH Cross Contitech FT 210-32 DS G1/2 67402

The AIRSUSTECH 3B10X3T is a triple-convoluted industrial air spring designed for pneumatic actuation, load support, vibration isolation, and controlled movement. It features a 210 mm cover plate, 180 mm bolt center distance, G1/2 air inlet, and 118-400 mm operating height range, with a maximum bellows diameter of about 270 mm.

As a replacement, 3B10X3T corresponds to ContiTech FT 210-32 DS / 67402, and is also cross-referenced with Firestone W01-R58-4059, Dunlop Pneuride 10" × 3 / SP1539 / PNP 30545 01 10, Norgren M/31103, Airkraft 3B2255 / 115055, Oria 10'' x 3, and Parker 9109031.

For buyers searching for a 10" × 3 triple convoluted air spring, AIRSUSTECH 3B10X3T provides a practical aftermarket alternative with broad OEM compatibility.

When replacing ContiTech FT 210-32 DS with AIRSUSTECH 3B10X3T, the key dimensions should be checked rather than relying on the model number alone. AIRSUSTECH 3B10X3T has a 210 mm cover plate diameter and 180 mm mounting-hole center distance, with 4 × M10 mounting threads and a G1/2 air connection.

The 118-400 mm operating height range and approximately 270 mm maximum bellows diameter are equally important. They determine how much vertical movement is available and whether sufficient clearance exists inside the machine. With a stated 282 mm full stroke, the 3B10X3T is suitable where the original air spring requires substantial height adjustment or pneumatic movement.

For a replacement installation, buyers should compare cover plate diameter, bolt center distance, mounting thread, air-port size, minimum/maximum height, and maximum bellows diameter. Matching these critical dimensions helps ensure that AIRSUSTECH 3B10X3T can be installed in the existing FT 210-32 DS position without unnecessary structural modifications.