 
|
FS 200-10 CI 1 Convoluted Contitech Air Spring Max. OD 250mm Rubber Air Actuator
Product Details:
| Place of Origin: | Guangzhou China |
| Brand Name: | AIRSUSTECH |
| Certification: | ISO/TS16949:2009 |
| Model Number: | FS 200-10 CI |
Payment & Shipping Terms:
| Minimum Order Quantity: | 3Pieces |
|---|---|
| Packaging Details: | Strong Carton Box or as Customers Requirement |
| Delivery Time: | 5-8 Working Days |
| Payment Terms: | T/T, Western Union, Paypal or Others |
| Supply Ability: | 1000PCS/Week |
|
Detail Information |
|||
| Material: | Rubber + Steel | Certificate: | ISO/TS16949:2009 |
|---|---|---|---|
| Warranty: | One Year | Number Of Convolutions: | 1 Convoluted |
| Packing: | Neutral Box Or As Customers' Request | Size: | 24 X 24 X 24cm |
| Type: | Convoluted Air Spring | Position: | Front Or Rear |
| Refer Number: | Continental FS 200-10 CI | OEM: | Acceptable |
| High Light: | 1 Convoluted Contitech Air Spring,250mm Contitech Air Spring |
||
Product Description
FS 200-10 CI Contitech 1 Convoluted Air Spring Max.OD 250mm Rubber Air Actuator
OEM NO.
Contitech FS 200-10
Contitech FS200-10
Contitech FS 200 10
Contitech FS200 10
Contitech FS 20010
Contitech FS20010
Continental FS 200-10 CI
Continental FS 200 10 CI
Continental FS 20010CI
Specifications and Detailed Technical Parameters:FS 200-10 CI Rubber Air Actuator
Top/Bottom cover plate diameter: 161mm
The Blind Nut/Nut/Teeth of the top/bottom plate: 2×M8
The screw center distance: 89mm
The Max.OD diameter: 250mm
DR: 265mm
Min. Height: 51mm
Max. Height: 140mm
Min. pressure: 0 bar
Return force to min.height: ≤200N
Overall weight with clamped plates: 2.3kg
Type | Order No. |
Rubber bellows only | 72850 |
with crimped plates, G1/4 air inlet (A) 44.5 mm excentrical | 60030 |
with crimped plates and bumper (A) 44.5 mm excentrical | 2681047000 |
with crimped plates, G3/4 air inlet (A) 38.1 mm excentrical | 2681045000 |
with stainless steel crimped plates, G3/4 air inlet (A) 38.1 mm excentrical | 69695 |
Factors affecting the elastic characteristics of air springs
1. Cord angle
2. Cord spacing
3. Number of cord layers
4. Inflatable air pressure
5. Influence of additional air chamber
About air spring production knowledge
Rubber lining is a retractable inner mold with different shapes formed by the polymer properties of vulcanized rubber and high-strength fiber cloth. It is a product made of vulcanized rubber and fibers. It is compressive, elastic and airtight. After being filled with compressed air, the air bag will expand to meet the design requirements of its cross-section. Under the premise of ensuring quality, if it is used improperly, the service life of the air spring will be greatly shortened.
Due to its low quality, good comfort and fatigue resistance, the rubber air spring has the advantages of long service life, vibration reduction and noise reduction. Widely used in, industrial machinery, instrumentation and other equipment.
The production process and production process of the surface fabric of the air spring machine penetrate into the gap of the fabric, and the bonding of the process rubber and the fabric of the rubber rope formed by tight carding. Reduce shrinkage: The elastic deformation of the rubber should be reduced, so that the surface of the pressed rubber wire is smooth and the dimensional change is small. The air spring film required for the production of air springs usually uses a three-roller air spring machine. Through this process, it embodies the protection of the air spring in many ways, thus prolonging its service life.
The related picture of FS 200-10 CI 1 Convoluted Air Spring