 |
2 Convolutions Industrial Air Springs Firestone W01-M58-6183 YORK 506324/01 Replcement
Product Details:
| Place of Origin: | Guangzhou China |
| Brand Name: | AIRSUSTECH |
| Certification: | ISO/TS16949:2009 |
| Model Number: | 2B6183 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 3Pieces |
|---|---|
| Packaging Details: | Strong Carton Box or as Customers Requirement |
| Delivery Time: | 5-8 Working Days |
| Payment Terms: | T/T, Western Union, Paypal or Others |
| Supply Ability: | 1000PCS/Week |
|
Detail Information |
|||
| Material: | Rubber And Iron | Certification: | ISO/TS16949:2009 |
|---|---|---|---|
| Warranty: | 12 Months | Place Of Origin: | Guangzhou, China |
| Packing: | Neutral Box Or As Customers' Request | Type: | Air Spring Complete |
| Sample: | Available | HS Code: | 8708809000 |
| Cross Reference: | Firestone W01-M58-6183 | Convolutions: | 2 |
| Highlight: | 2 Convolutions Industrial Air Springs,W01-M58-6183 Industrial Air Springs,506324/01 Industrial Air Springs |
||
Product Description
Double Convoluted Industrial Air Springs Firestone W01-M58-6183 YORK 506324/01 Replcement
2B6183 Specifications and Technical Parameters
1. Mounting threads on Top plate Qty: 2pcs×M8×1.25
The screw center distance: 89mm
2. Bottom cover plate screw (nut) teeth Qty: 2pcs×M8×1.25
The screw center distance: 89mm
3. Top cover plate diameter: 160mm
4. Bottom cover plate diameter: 160mm
5. Min Height: 81mm
6. Air inlet: 1/4BSPG, Offset, 45mm
7. Bumper block: Without
8. Belt loop/belt loop with belt loop: with one belt loop
Cross Reference
Firestone Style 20F2
Air spring supplier/competitor: Firestone
Supplier//competitor: W01-M58-6183; W01 M58 6183; W01M586183; WO1-M58-6183; WO1 M58 6183; WO1M586183; w01-m58-6183; w01 m58 6183; w01m586183
Air spring supplier/competitor: YORK
Supplier/competitor number: 506324/01
|
Style 20-2 |
Description |
Assembly Order No. |
|
Blind nuts, 1/4 BSP |
W01-M58-6183 |
|
|
Blind nuts, 3/4 BSP |
W01-M58-6194 |
|
|
Rubber bellows only |
W01-M58-6146 |
Our standard two ply air spring bellows is actually made up of four layers
a. An inner liner of calendered rubber.
b. One ply of fabric reinforced rubber.
c. A second ply of fabric-reinforced rubber (with the cords at a specific bias angle to the first ply).
d. An outer cover of calendered rubber
The air spring does not need to be repaired or specially maintained in normal use. It is only necessary to regularly flush the metal parts (piston, cover plate) that are prone to sediment accumulation when cleaning the vehicle, without using any detergent. Damaged airbags cannot be repaired, do not repair any damaged airbags. During installation or maintenance, if the airbag comes into contact with solvent, hydraulic oil or grease, please wipe off these substances with a dry cloth to prevent the rubber material of the airbag from swelling due to soaking.
Convoluted Air Spring
1. AIR INLET
1/4 BSP parallel is standard. 3/4 BSP parallel is also available for most parts.
2. BLIND NUT
M8 x 1.25 — 6H x 15 (two or four per each plate depending on part size). Used for mounting the part.
3. UPPER BEAD PLATE
Permanently crimped to bellows to form an airtight assembly which allows for leak testing before the unit leaves the factory. Zinc/chromate plated for rust protection.
4. GIRDLE HOOP
Wire wound type shown, molded into the bellows.
5. BELLOWS
Wall gauge is approximately 6 mm.
6. LOWER BEAD PLATE
Usually the same as upper bead plate, except without air inlet
Application
ROBOTIC COUPLING
CONVEYOR END STOP
MOUNTAIN/TRAIL BIKE
SHOCK ABSORBER TEST SYSTEM
SCREENING MACHINE COVER CLAMP
PIPE CRAWLER
DELICATE ELECTRONIC EQUIPMENT
VIBRATING SCREEN
SHEET WELDING CLAMP
SWASH PLATE MOTOR
PERFECT BOUND MAGAZINE CUTTER
WAVE POWER MODULE
CHECK VALVE LAPPING
SELF ALIGNING DEVICE
AIR BLAST GENERATOR
SOLAR TRACKER
The picture of AIRSUSTECH Air Bag
